AGL 38.55 Decreased By ▼ -1.03 (-2.6%)
AIRLINK 128.31 Decreased By ▼ -2.91 (-2.22%)
BOP 7.02 Increased By ▲ 0.21 (3.08%)
CNERGY 4.56 Decreased By ▼ -0.15 (-3.18%)
DCL 8.20 Decreased By ▼ -0.24 (-2.84%)
DFML 39.75 Decreased By ▼ -1.72 (-4.15%)
DGKC 79.40 Decreased By ▼ -2.69 (-3.28%)
FCCL 31.89 Decreased By ▼ -1.21 (-3.66%)
FFBL 71.49 Decreased By ▼ -1.38 (-1.89%)
FFL 12.29 Increased By ▲ 0.03 (0.24%)
HUBC 108.84 Decreased By ▼ -1.90 (-1.72%)
HUMNL 13.65 Decreased By ▼ -0.86 (-5.93%)
KEL 4.95 Decreased By ▼ -0.24 (-4.62%)
KOSM 7.55 Decreased By ▼ -0.06 (-0.79%)
MLCF 37.56 Decreased By ▼ -1.34 (-3.44%)
NBP 68.00 Increased By ▲ 3.99 (6.23%)
OGDC 188.20 Decreased By ▼ -4.62 (-2.4%)
PAEL 24.93 Decreased By ▼ -0.75 (-2.92%)
PIBTL 7.30 Decreased By ▼ -0.04 (-0.54%)
PPL 148.50 Decreased By ▼ -5.57 (-3.62%)
PRL 24.76 Decreased By ▼ -1.07 (-4.14%)
PTC 17.00 Decreased By ▼ -0.81 (-4.55%)
SEARL 79.80 Decreased By ▼ -2.50 (-3.04%)
TELE 7.44 Decreased By ▼ -0.32 (-4.12%)
TOMCL 32.70 Decreased By ▼ -0.76 (-2.27%)
TPLP 8.24 Decreased By ▼ -0.25 (-2.94%)
TREET 16.75 Increased By ▲ 0.13 (0.78%)
TRG 56.59 Decreased By ▼ -0.81 (-1.41%)
UNITY 28.09 Increased By ▲ 0.58 (2.11%)
WTL 1.32 Decreased By ▼ -0.05 (-3.65%)
BR100 10,374 Decreased By -130.9 (-1.25%)
BR30 30,573 Decreased By -653.5 (-2.09%)
KSE100 97,075 Decreased By -1005.1 (-1.02%)
KSE30 30,248 Decreased By -311.2 (-1.02%)
Print Print 2006-06-08

(CUSTOMS) SRO 565 (I)/2006

Text of (CUSOTMS) SRO 565 (I)/2006.
Published June 8, 2006

Text of (CUSOTMS) SRO 565 (I)/2006.

GOVERNMENT OF PAKISTAN
MINISTRY OF FINANCE, ECONOMIC AFFAIRS,
STATISTICS AND REVENUE
(REVENUE DIVISION)

Islamabad, the 05th June, 2006

NOTIFICATION
(CUSTOMS)

In exercise of the powers conferred by section 19 of the Customs Act, 1969 (IV of 1969), and in suppression of Notification No SRO 565(I)/2005, dated the 6th June, 2005, the Federal Government is pleased to exempt raw materials, sub-components, components, sub-assemblies and assemblies, as are not manufactured locally, specified in column (3) of the Table below, imported for the manufacture of goods specified in column (2) of the said Table, from so much of customs-duty leviable under the First Schedule to the Customs Act, 1969 (IV of 1969), as are in excess of the rates specified in column (5) of that Table, subject to certain exclusion specified below, the special conditions as specified in column (6) of the Table and the following general conditions, namely: -
(i) A sales tax registered importer-cum-manufacturer having suitable in-house facilities shall submit a complete list in the prescribed format [appended as Form-I] of his annual requirement of permissible items (inputs) he intends to import for the manufacture of goods mentioned in column (2) of the table to the Collector of Sales Tax and Federal Excise having jurisdiction or to any other organisation or person as authorised by the Central Board of Revenue;
(ii) the importer-cum-manufacturer shall file a request containing a declaration of input/ output ratios to the Collector of Sales Tax and Federal Excise or the authorised person. The Collector or the authorised person may accept the declaration of input output ratio as declared by the applicant and determine the annual requirement of inputs, without any physical verification. In case the Collector or authorised person is not satisfied with declared input output ratios of the items to be manufactured because of their being prima-facie not in accordance with the prevalent average of the relevant industry or for any other reason, he may, after allowing a reasonable provisional quantity, make a reference to the Engineering Development Board or IOCO or to any other recognised authority for final determination thereof. The collector or authorised person shall then determine the final annual quantitative entitlement of inputs and the applicant shall proceed to consume imported inputs in accordance with the input output ratios and quantities so determined;
(iii) the clearance of inputs shall be allowed through one port or dry port only, however, for the liquid bulk cargo imported at Karachi, the facility of clearance from either port ie Port Qasim and Karachi Port shall be allowed subject to maintenance of centralised record of quota debiting at the port for which the Provisional or Final Certificate is issued;
(iv) the authorised officer of Sales Tax Collectorate shall furnish all relevant information online to Customs Computerised System (PACCS) as per Form-II appended to this notification against a specific user ID and password obtained under section 155D of the Customs Act, 1969. In already computerised Collectorate/Customs stations where the PACCS is not yet operational, the Project Director or any other authorised person shall feed the requisite information in the PACCS on daily basis and on weekly basis of the data obtained from the stations which have not yet been computerised;
(v) the importer-cum-manufacturer shall file Goods Declaration on the prescribed format and manner with complete details of authorisation of imported inputs for clearance. The Collector of Customs on satisfaction of correct declaration shall allow clearance of imported inputs after obtaining post dated cheque for the differential amount of statutory tax and concessionary taxes the importer-cum-manufacturer shall maintain records of the inputs and the goods manufactured from imported inputs in such form as may be prescribed by the Central Board of Revenue or required under any other law for the time being in force;
(vii) the importer-cum-manufacturer shall communicate to the concerned Collector of Sales Tax and Collector of Customs in writing about the consumption of imported items within sixty days of consumption of goods. The post dated cheque shall be released or cancelled on receipt of written confirmation regarding consumption of goods by the importer-cum-manufacturer. In case of non-consumption within one year from the date of import, the importer shall pay the customs-duty and other taxes involved or obtain extension from the Collector of Sales Tax and Federal Excise under intimation to Collector of Customs giving plausible reasons for a reasonable period;
(viii) the Collector of customs may, on its own or through the Collector of Sales Tax and Federal Excise or through any other department working under Revenue Division, whenever deemed necessary get the records of the importer-cum-manufacturer audited and may also get the stocks verified. In case it is found that the inputs have not been properly accounted for or consumed for the manufacture and supply of goods as prescribed, the Collector may initiate proceedings for the recovery of leviable customs-duty and other taxes besides penal action under the relevant provisions of the laws in force.
(ix) The importer-cum-manufacturer may also get manufactured any of the item from the raw materials, sub-components, components, sub-assemblies or assemblies mentioned in column 3 of the Table below, to be used in manufacturing of goods mentioned in Column 2 of the Table below, from another manufacturer (vendor), duly registered with Sales Tax department, having suitable in-house facility. In such case,
(i) the vendor shall have a firm contract with the importer-cum-manufacturer;
(ii) the importer-cum-manufacturer may provide the imported raw materials, sub-components, components, sub-assemblies or assemblies mentioned in column (3) to the vendor;
(iii) the vendor shall not be entitled to import the raw materials, sub-components, components, sub-assemblies or assemblies under this SRO for manufacturing of goods to be supplied to the importer-cum-manufacturer;
(iv) the vendor after manufacturing the sub-components, components, sub-assemblies or assemblies supply them only to the importer-cum-manufacturer with whom he held a firm contract; and
(v) the vendor shall also maintain proper record of the raw materials, sub-components, components, sub-assemblies or assemblies consumed or utilised and goods supplied to the importer-cum-manufacturer.
(x) Under circumstances of exceptional nature and for reasons to be recorded in writing, the Board may relax any of the conditions, if it is satisfied that such condition is detrimental to the bonafide purposes of importer-cum-manufacturer's business, subject to such surety or guarantee as it may deem appropriate to secure to ensure proper accentual and utilisation of the imported goods:
Provided the mild steel bars, mild steel rods, mild steel wire rods and plastics shall not be entitled for exemption under this notification.
EXPLANATION 1: For the purpose of this notification the expression "not manufactured locally" shall mean the goods which are not included in the list of locally manufactured goods, specified in the relevant Customs General Order or declared as such by the Central Board of Revenue or Engineering Development Board.
EXPLANATION 2: The importers can simultaneously avail the statutory rate of duty on those items mentioned in the table imported as part of CKD/SKD kits which have statutory rates lower than the CKD/CBU rates under this notification.



=============================================================================================================================
TABLE
=============================================================================================================================
S.No Description of Description of raw Heading Extent of Special
goods to be materials, sub-components, or sub- exemption from conditions
manufactured. components and heading customs duty
assemblies. Nos. in excess of
rates given
below.
=============================================================================================================================
(1) (2) (3) (4) (5) (6)
=============================================================================================================================
Raw materials
1. Agarbatti. Diethyl phthlate. 2917.3400 10% ad val. Nil
2. Air conditioners. Raw materials 5% ad val. The in-house
facility for air
conditioner
manufacturing
shall include the
following: -
(1) Hot stamping foil. 3212.1000 i) Charging
machine
(2) Deep draw cold rolled 7209.1790 ii) Condenser
steel coils - of a bending
thickness of 0.5mm or machine
more but not iii) Rear panel
exceeding 1mm. bending
machine
(3) Cold rolled steel coils 7209.1890 iv) Front panel
- of a thickness of bending
less than 0.5mm. machine
(4) Electro galvanised 721 0.3090 v) Rear panel
steel sheet. bending
machine.
(5) Bars and rods of 7407.2200 vi) Halogen leak
copper -nickel base detector
alloys (cupro-nickel)
or copper-nickel-zinc
base alloys (nickel
silver).
(6) Brazing rod (copper). 7407.2900
Sub-components and 10% ad val.
Components.
(7) Compressor cover. 8415.9090
(8) Axial fan. 8414.5190
(9) Front panel grill. 841 5.9090
(10) Service value 2 way & 8481.8000
3 way.
(11) Terminal block. 8415.9090
(12) Single phase AC 8501.4090
motor upto 320 watts.
(13) Remote control. 841 5.9090
(14) Plasma filter 8415.9090
assembly.
(15) Rubber pipe cut to 4009.1100
size.
(16) Compressor. 841 4.3010 0% ad val.
3 Deep-freezers/ Raw Materials. 5% ad val. The in-house
chest cooler. facility for deep
freezer! chest
cooler
manufacturing
shall include the
following: -
(1) Hot stamping foil. 321 2.1000 i) Sheet Metal
Shop
(2) Deep draw cold rolled 7209.1790 ii) Paint shop
steel coils - of a iii) Vacuum
thickness of 0.5mm or forming machine
more but not along with
exceeding 1mm. moulds
(3) Cold rolled steel coils 7209.1890 iv) Foaming
- of a thickness of machine along
less than 0.5mm. with moulds, jigs
and fixtures.
(4) Electro galvanized 721 0.3090
steel sheet.
(5) Bars and rods of 7407.2200
copper -nickel base
alloys (cupro-nickel)
or copper-nickel-zinc
base alloys (nickel
silver).
(6) Brazing rod (copper). 7407.2900
(7) Aluminium sheet 7606.9290
embossed or
patterned.
(8) Anti fungal soft PVC 3904.2200
compound according
to DIN 53 739.
Sub-components and
Components. 10% ad val.
(9) Glass door. 841 8.9990
(10) Light switch. 8535.3010
(11) Lamps of a power not 8539.2200
exceeding 20 watts.
(12) Terminal blocks. 841 8.9990
(13) Single phase AC 8501.4090
motor upto 320 watts.
(14) Compressor. 841 4.3010 0% ad val.
4. Refrigerators! Raw Materials. 5% ad val. The in-house
Visicoolers. facility for
refrigerator!
visicooler
manufacturing
shall include the
following: -
(1) Hot stamping foil. 321 2.1000 i) Sheet Metal
Shop
(2) Deep draw Cold rolled 7209.1790 ii) Paint shop
steel coils - of a iii) Vacuum
thickness of 0.5mm or forming machine
more but not along with
exceeding 1 mm. moulds
(3) Cold rolled steel coils 7209.1890 iv) Foaming
- of a thickness of machine along
less than 0.5mm. with moulds, jigs
and fixtures.
(4) Electro galvanized 7210.3090
steel sheet.
(5) Bars and rods of 7407.2200
copper -nickel base
alloys (cupro-nickel)
or copper-nickel-zinc
base alloys (nickel
silver).
(6) Brazing rod (copper). 7407.2900
(7) VCM sheet. 721 0.7090
(8) Anti fungal soft PVC 3904.2200
compound according
to DIN 53 739.
Sub-components and
Components 10% ad val.
(9) Light switch. 8535.3010
(10) Lamps of a power not 8539.2200
exceeding 20 wafts.
(11) Terminal blocks. 8415.9090
(12) Single phase AC 8501.4090
motor upto 320 watts.
(13) Condenser Fin type 841 8.9920 5% ad val.
(for use in Visicoolers)
(14) Glass Door for use in 841 8.9990 10% ad val.
Visicoolers
(15) Compressor. 841 4.3010 0% ad val.
(16) Evaporator(Rollbond 8418.9910 0%adval.
type! Tube on plate
type/Fin type).
5. Washing machines Raw Materials. 5% ad val. The in-house
facility for
washing
machine
manufacturing
shall include the
following: -
(1) Deep draw-cold rolled 7209.1790 i) Sheet metal
steel coils - of a shop for metal
thickness of 0.5mm or body machines.
more but not
exceeding 1mm.
(2) Cold rolled steel coils 7209.1890 ii) Injection
- of a thickness of moulding
less than 0.5mm. machines along
with moulds at
least for the
wash tub.
(3) Electro galvanized 721 0.3090
steel sheet.
Sub-components and 10% ad val.
Components
(4) Terminal blocks. 841 5.9090
(5) Single phase AC 8501.4090
motor upto 320 watts.
6. Car Air-conditioners Raw Materials. 5% ad val. Nil
(1) Rubber hose (high 4009.3100
pressure).
(2) Aluminium bar. 7604.2910
(3) Aluminium sections. 7604.2990
(4) Aluminium strip clad 7606.1200
(in coils).
(5) Aluminium pipe/tubes. 7608.2000
(6) Brazing coils/filler 8311.9000
metal.
Sub-components and
Components 10% ad val.
(7) Plastic caps. 3923.5000
(8) Blower wheel. 3926.9099
(9) Belt for compressor. 4010.3110
(10) 0ring. 4016.9320
(11) Aluminium 8415.9090
fins/corrugated fins.
(12) Bracket (Aluminium). 761 6.9990
(13) Pipes. 841 5.9090
(14) Suction/discharge 8415.9090
fitting assy.
(15) Distributor assy. 8415.9090
(16) Condenser partition 841 5.9090
plate/separator.
(17) Stay for sensor. 7616.9990
(18) Side plates for 841 5.9090
condensers /
evaporators.
(19) HVACNAC unit (for 841 5.9090
current civic model
only).
(20) AC control unit. 8415.9090
(21) Body accumulator. 8415.9090
(22) Capsule for heater 8415.9090
core.
(23) Evaporator core plate. 8415.9090
(24) HVAC door sub 8415.9090
assembly.
(25) Glass sight/joint
receiver.
(26) Insert for heater core. 8415.9090
(27) Switches. 8536.5090
(28) Tank header, plate 8415.9090
and header pipe for
condensers!
evaporators.
(29) Tubes for condenser! 8415.9090
M tubes / Surpentine
tubes.
(30) Valves. 8481.3000
(31) Expansion valve. 8481.8000
(32) Idle pully. 8483.5020
(33) Fuse assy. 8536.1000
(34) Actuator. 8415.9090
(35) Clutch magnet for 841 5.9090
compressor & parts.
7 Electrostatic Raw materials 5°/ ad val Nil
Coating Powder.
(1) Epoxy resin. 3907.3000
(2) Polyester resin. 3907.9900
(3) Organic and inorganic 3204.1700
pigments.
(4) Triglycidyl- 2933.6900
isocyanurate (TGIC).
(5) Flow control. 3906.1000
8 Polyol Compound Raw materials
Component A. 5/0 ad val. Nil
(1) Hexylamine catalyst 2933.5990
and or dinethyolcyoth
examine (DMCHA).
(2) Silicon stabilizer. 3402.9000
9 Evaporators and Raw materials 0% ad val. Nil
Condensers for air-
conditioners, deep (1) Copper Tubes in level 7411.1090
freezers and wound coils.
refrigerators. (2) Copper Tube inner 7411.1020
grooved.
(3) Copper alloys rings 7407.2200
for soldering and
brazing.
(4) Copper tube! pipes 7411.1090 5% ad val.
(5) Aluminum Foil 7607.1990
10. Air-conditioning, Raw materials Respective 5% ad val. As approved by
chilling, Headings . the Engineering
humidification and Sub-components and 10% ad val. Development
industrial components Board (EDB).
refrigeration plants. Modules! assemblies 10% ad val.
11. Alkyd resins. Raw materials. 10% ad val. Nil
(1) Crudesoybean oil, 1507.1000
whether or not
degummed.
(2) Crude coconut oil. 1513.1100
12. Aluminum pre- Raw materials. 10% ad val. Nil
sensitized printing
plates. (1) Coated paper. 4811.5990
(2) Aluminum foil. 7607.1990
13. Articles of Raw Materials. 5% ad val Nil
stationery.
(1) In powder or in flakes 2504 1000
(natural graphite)
(2) Kaolin and other
kaolinic clays whether 2507 0000
or not calcined (china
clay)
(3) Other clays (ball clay) 2508.4000
(4) Methanol (methyl 2905.1100
alcohol)
(5) Butanone (methyl 2914 1200
ethyl ketone)
(6) Other saturated 2915.9000
acyclic acids
(7) Acid dyes whether or 3204 1200
not premetal lised,and
(8) Basic dyes and
preparations based 3204.1300
thereon (dyes)
(9 )Pigments and
preparations based 3204.1700
thereon (pigments)
(10) Stamping foil 3212.1000
(11) Inks for ball points
pens, fine liners and 321 5.9010
fibre tips
(12) Stearic acid 3823.1100
(13) Zinc stearate 3823.1930
(14 )Edenol 3824.9099
(15) Hardners 3824.9099
(16) Pmc polystyrene 3903.1900
(17) Styrene-
acrylonitrile(san)
copolymers (pmc san 3903.2000
resin)
(18) Acrylonitrile butadiene
styrene (abs) 3903.3000
copolymers (pmc abs
resin)
(19) Acrylic polymer (fast
drying) 3906.9090
(20) Polyacetal 3907.1000
(21) Alkyd resins (fast
drying) 3907.5000
(22) Amino-resins (fast 3909.3000
drying)
(23) Cellulose nitrate 3912.2010
(24) Carboxyl-methyl 3912.3100
cellulose and its salts
(carboxy methyl
cellulose)
(25) Porous fibre rods for
making marker nibs 3916.9090
(26) Biaxially oriented
polypropylene (bopp)
film, laminated 3920.2040
(laminated film for
sachet)
(27) Plastic film
(shrinkable) 3920.2090
(28) Ldpe sheet of a 3921.9090
thickness up to 1 mm
(29) Wood slats 4408.9010
(30) Paper and
paperboard coated
impreghated or 4811.6000
covered with wax,
paraffin wax,
strearin,oil or glycerol
(31) Heat transfer film 4908.9000
(32) Electro galvanized 7217.2000
wire
(33) Spring wire 7217.9000
(34) Brass alloy wire 7408.2100
(35) Of copper-nickel base
alloys (cupro-nickel)
or copper-nickel-zinc 7408.2200
base alloys (nickel
silver) - fickle silver
wire
(36) Potato starch 1108.1300
Parts and Components.
Parts and Components. 10% ad val
(37) Carbon lead 2803.0090
(38) Tip eraser 401 6.9200
(39) Steel balls not 7326.9020
exceeding 1mm
diameter (steel balls)
(40) Pencil ferrules 7616.9930
(41) Paper knives, letter
openers, erasing
knives, pencil
sharpeners and 8214.1000
blades therefor
(sharpener blades)
(42) Synthetic fiber
reservoirs of the kind
used in writing 9608.6000
instruments (ink
reservoirs)
(43) High precision nibs
made of special metal
for use in 9608.9100
manufacture of writing
instruments (fountain
pen nibs)
(44) Nibs points( for fiber
tip pens and markers) 9608.91 00
(45) Tips for fineliners 9608.9100
(46) High tensile metal
clips for writing 9608.9910
instruments
(47) Pen caps and clips of 9608.9910
steel (pen caps)
(48) Ball pen tips 9608.9920
(49) Precision barrel parts
for use in 9608.9990
manufacture of writing
instruments
(50) High precision ink
feed transference 9608.9990
system
(51) Raw cores used for 9609.2010
making black lead
(52) Color lead 9609.9000
14. Artificial leather Raw materials.
industry 10% ad val. Nil
(1) Polyurethene resin. 3208.9090
(2) PVC emulsion grade. 3904.1000
(3) Release paper. 4811.5990
15. Audio/video Raw materials.
cassettes. 10% ad val. Nil
(1) Self adhesive sheet. 3919.9000
(2) Plastic film / foil. 3921 .1900
3921.9090
(3) Packing material. 3923.1000
(4) Screws. 741 9.9900
(5) Magnetic tape in 8523.1300
jumbo rolls.
(6) Leader Tape Webs.
(7) Splicing Tape Rolls. 391 9.9000
(8) Liner Sheets. 3926.9099
(9) Pressure pads. 5911.9000
(10) Steel shields. 7326.9090
(11) OPP film roll. 3920.1000
(12) OPS roll. 3921.1100
(13) Staking Rod Roll. 3926.9099
16. Audiotapes Raw material.
Polyester base film/ 3921 .1100 10% ad val. Nil
polyester film-uncoated
17. Boilers Raw material. 5% ad val. Nil
(1) Boiler quality steel 7208.4090
plates.
(2) Boiler Tubes 7304.2900
7304.3100
7304.3900
(3) Emulsion filter paper 5603.1200
Sub-components and 10% ad val.
components.
(4) Stop/control valve. 8481.3000
(5) Blow down valve. 8481.2000
(6) Feed check valve. 8481.3000
(7) Seamless tubes (cut 7304.2900
to size). 7304.3100
18. Bearings. Sub-components and
component. 0 % ad val. Nil.
(1) Balls, needles and 8482.91 00
rollers.
(2) Other parts of 8482.9910
bearings. 8482.9990
19. Bolts, nuts, screws, Raw materials. 5 % ad val. Nil.
concrete nails and
blind rivets. (1) High carbon / high 7213.9190
tensile wire rod. 721 3.9990
(2) High carbon steel 7213.9900
wire.
(3) Brass wire. 7408.2100
(4) Aluminum wire. 7605.1900
20. Cables and Raw materials (excluding
Conductors. artificial plastic resin). 5 % ad val. Nil.
(1) Pigments. 3204.1700
(2) Wire drawing 3403.1990
lubricant.
(3) Chlorinated paraffin 3824.9080
(for PVC compound).
(4) Cable filling and 3824.9099
flooding compound.
(5) Water blocking tape. 5604.9000
(6) Tin coated steel strip. 7210.1200
(7) High carbon steel wire 7213.9190
rod. 721 3.9990
(8) Copper covered steel 7217.3090
wire.
(9) Aluminum strip. 7606.9290
(10) Core covering tape. 3920.1000
(11) Polyethylene 3907.6090
compound (cable
grade).
(12) Steel tape / strip (tin 7210.5000
free both sides).
(13) Aluminium foil strip 7607.2000
(both sides PE
laminated).
(14) Hot melt sealant! 3910.0000
marco melt.
(15) Water swellable yarn. 5606.0000
(16) Coloring ink. 3215.9090
(17) Polybutylene b 3907.9900
trephthalate (mbt).
(18) Thirotrapic 2712.1000
hydrophobojel / jelly.
(19) Binder yarn. 5607.41 00
(20) Binder tape. 5607.4100
(21) Glass yarn. 7019.1900
(22) Identification tape. 3921.1900
(23) Semi conducting 5906.9900
Nylon! Rubber
insulation tape.
(24) Fiber Reinforced 3916.9090
Polypropylene I Glass
Reinforced
Polypropylene.
(25) Aramid yarn. 5402.1000
(26) Single / Multi mode 9001.1000
optical fiber (ITU-T G-
652, ITU-T G-651 &
ITU-T G-655).
(27) Insulating paper. 4804.2900
(28) Semi conducting tape. 5906.9900
(29) Polypropylene Tape 2921 .1900
(30) Emulsion Filter Paper 5603.1200
21. Centrifugal and Sub-components and
turbine pumps. components. 10% ad val. Nil
(1) Shafting material. 841 3.91 90
(2) Raw casting nozzle. 8413.9190
(3) Raw casting impeller. 8413.9110
(4) Special couplings. 8483.6090
(5) Grinding pin. 8414.9090
(6) Valve casing stainless 8484.2000
Steel
(7) Intermediate chamber 841 3.91 20
Stainless Steel
Fabricated Laser
Welded
(8) ImpellerCPL 8413.9110
Stainless Steel
(9) Suction 841 3.91 90
lnterconnector
Stainless Steel
(10) Top Intermediate 841 3.91 20
chamber Stainless
Steel Fabricated
Laser Welded
(11) 0ring seal with 8484.9000
Tungsten Carbide
faces and EPDM
rubber parts in sizes
1/2", 3/4", 5/8", 7/8",
1" and 1.25" for water
supply pumps
(12) Upper end Piece 8413.9120
Stainless Steel
22. Ceramics. Raw materials. Nil
(1) Gypsum board paper 4805.9290 5% ad val.
(2) Grinding stone. 6804.1000
(3) Alumina lining bricks I 6903.2000
ceramic roller.
(4) Refractory products of 6903.9010 10% ad val.
kind used in industrial
ovens, kilns, and
furnaces.
23. Circuit Breakers Sub-components and
components. 5% ad val. Nil
(1) Nut. 7318.1690
(2) Pin. 731 9.3000
(3) Springs. 7320.9090
(4) Lever. 7326.9090
(5) Bearing. 8482.8000
(6) Charging shaft. 8483.3010
(7) Cam. 8483.3010
(8) Contact bush. 8483.3010
(9) Half shaft mounted. 8483.3010
(10) Rectifier. 8504.5000
(11) Burn off indicator. 8531.8000
(12) Switch (limit, micro). 8536.5090
(13) Terminal. 8536.9090
(14) Vacuum interrupter / 8538.9010
bottle.
(15) Driye frame. 8538.9090
(16) Contact holder. 8538.9090
(17) Pole housing. 8538.9090
23. Circuit Breakers Sub-components and
components. 5% ad val. Nil
(1) Nut. 7318.1690
(2) Pin. 731 9.3000
(3) Springs. 7320.9090
(4) Lever. 7326.9090
(5) Bearing. 8482.8000
(6) Charging shaft. 8483.3010
(7) Cam. 8483.3010
(8) Contact bush. 8483.3010
(9) Half shaft mounted. 8483.3010
(10) Rectifier. 8504.5000
(11) Burn off indicator. 8531.8000
(12) Switch (limit, micro). 8536.5090
(13) Terminal. 8536.9090
(14) Vacuum interrupter / 8538.9010
bottle.
(15) Drive frame. 8538.9090
(16) Contact holder. 8538.9090
(17) Pole housing. 8538.9090
(18) Contact support. 8538.9090
(19) Contact angle. 8538.9090
(20) Guide (bush). 8538.9090
(21) Housing assy. 8538.9090
(22) Shock absorber 8538.9090
(tube).
(23) Roller. 8538.9090
(24) Shroud (cover). 8538.9090
(25) Partition wall CPL. 8538.9090
(26) Partition kpl (right & 8538.9090
left).
(27) Connecting rod. 8538.9090
(28) Connecting bear 8538.9090
welded.
(29) Strip. 8538.9090
(30) Angle. 8538.9090
(31) Stirnrad. 8538.9090
(32) Plunger head. 8538.9090
(33) Plate (plate, stopper). 8538.9090
(34) Stopper. 8538.9090
(35) Counter. 9029.1090
24. CNG Dispensers Sub-components and 0% ad val. Nil
manufacturing components.
Industry.
(1) Filter Elements. 8421.3990
(2) Valve 2 Way & 3 8481.8000
Way.
(3) SS ST Connecton, SS 7307.2200
Elbow, SS Tee, SS 7307.2900
Nipple.
(4) Bulk Head Fitting. 7609.0000
(5) Flat Panel Display & 8537.1000
LCD Display.
(6) Solenoid Valves. 8481.1000
(7) Muffler Sleeves. 841 3.91 90
(8) Stainless Steel Tube 7306.9000
1/2"-3!4"-1/4".
(9) Touch Key Pad. 8471.9090
(10) Processor Board With 8537.1000
Cables.
(11) Processor Computer. 8537.1000
(12) Ball Valves. 8481.8000
(13) Needle Valves. 8481 .8000
(14) SAE Fittings. 7609.0000
(15) ND Cards. 8537.1000
(16) Connector Board And 841 3.91 90
Electronics.
(17) Flow Meter. 9026.1000
(18) Gas Detector. 9027.1000
(19) Hose Assemble 1 Ft, 4009.4100
l2 Ft and 14 Ft.
(20) Power Supply. 8504.4090
(21) Pressure Gauge. 9026.2000
(22) Pressure Regulator. 9026.2000
(23) Pressure Transducer. 9026.2000
(24) Quick Disconnect. 8413.9190
(25) Soleonid Valve Block. 841 3.91 90
(26) Transmitter. 8413.9190
(27) EPDM 4002.7000
(28) Nickel alloy steel wire 7505.2200
25. CNG Kit. CKD Kit 0% ad val. Nil.
(1) High Pressure Pipes 4009.4200
6mm (1/4")
(2) Raw materials for 401 6.9390
Regulator Diaphram
(3) Filling Valves, Petrol 8481 .1000
solenoid Valves
(4) Check Valves/Non 8481.3000
return valves
(5) Pressure relief valves/ 8481.4000
Safety
(6) Inlet Valves, Solenoid 8481.9000
Valves
(7) Advancers! Spark 8511.9000
advance systems
(8) Switches 8536.4900
(9) Emulators 8538.9090
(10) 40,50 or 60 mm 400 9026.8000
bar Pressure Guages
with or without
transducer for kits
(11) CNG regulators 9032.9000
26. Composite Doors & Raw materials 5°/ ad val Nil
Windows
(1) Blowing agent 2903.4910
(2) Polyol 3824.9099
(3) Wood plastic 3904.2100
composite granules
Components 15% ad val.
(4) Hinges 8302.1000
27. Composite roll- Raw material 10°/ ad val Nil
formed window and
doors (1) Electro galvanized 721 0.3010
coils 7210.4910
7210.7020
Component 15% ad val.
(2) Float glass 7005.1000
7005.2100
28. Computer monitors CKD kits for assembly, 8471.6079 0 % ad val. Nil
comprising of Color Display
Tube, Printed Circuit Board,
Fly Back Transformer,
Bracket, Back Cover, Cable
Tie, Cable D-Sub, Capacitor,
Coil, Connector, Core, Diode,
Diskette Assembly, Earth,
Eyelet, Filter, Fuse, Holder,
IC, Inductor Axial Lead, Lead
Set, Led, Power Cord, Relay,
Resistor, Resonator, Screw,
Shield, Socket C.P.T., Socket
Power, Solder Wire, Spark
Gap, Spring Coil, Switch,
Thermistor, Tilt T Swivel,
Transistor, Wafer, Wire, Metal
rubber, Ribbon, Heat sink and
Front cabinet.
29. Cranes and Raw materials 5% ad val. Nil
derricks. (1) Steel plates 7208.0000
(2) Flex flat cable 731 2.1020
Sub-components!
components! modules! 10% ad val.
assemblies.
(1) Bus bar main power 8544.5990
supply
30. Defence stores, Raw materials Respective 5 % ad val. Under the
machinery and Headings certificate from
equipment the Director
manufactured for General
the use of defence Sub-components and Respective 10% ad val. Defence
forces. components. Headings Production,
Ministry of
Defence,
Government of
Pakistan.
31. Diapers and Raw materials.
sanitary napkins. 10/0 ad val. Nil
(1) Adhesives based on 3506.91 90
polymers or rubbers.
(2) Toilet or facial tissue 4803.0000
stock, towel or napkin
paper of a kind used
for household or
sanitary purpose
(non-porous).
(3) Non-wovens, whether 5603.1100
or not impregnated, 5603.1200
coated, covered or
laminated of man
made filaments.
(4) PE + NW laminate 3920.1 000
sheet.
(5) Frontal tape. 3920.9900
(6) Pre laminated tape. 3920.9900
(7) Perforated poly film. 3920.9900
(8) Poly back sheet. 3920.1000
3920.9900
(9) Hot melt adhesive. 3506.9190
(10) Siliconised paper. 4810.9900
(11) Loop pile fabric. 6001.2200
(12) Acquisition Layer 5603.9200
(13) Pre-Laminated Tape 3919.1090
(14) Frontal Tape 391 9.9000
(15) Waist Band Barrier 3921.9090
32. Diesel generating Raw materials. 5 % ad val. Nil
Sets.
(1) Insulating varnish 3208.9010
class f insulation.
(2) Impregnating resin. 3907.9900
(3) Laminated polyester 4807.9000
paper sheets/strips for
electric insulation
0.20mm to 0.50 mm
thick.
(4) Insulating glass 701 9.9010
sleeve (round/flat)
1.5mm to 20mm dia.
(5) Resig lass insulating 7019.9090
tape 0.3 x 20mm.
(6) Enamel copper wire - 8544.1190
round/flat.
(7) Electric cables rubber 8544.6000
/silicon insulated,
0.50mm2 to 1 50mm2.
Sub-components and 10% ad val.
components
(8) Flexible exhaust 7307.9900
extension pipe type
nsn61 15-17-044-3839
cut to size.
(9) Steel keys. 7326.9010
(10) Condensers 2x0.027 8503.0090
mf.
(11) Rotor for generator. 8503.0090
(12) Thyripart excitation 8503.0010
system.
(13) Transformer current! 8504.3100
voltage 20!5a-200/5a-
30va. 1 00/5a-200/5a
and 380v-41 5v 300-
500/5a 600-1 600!5a.
(14) Chokes 110v-415v. 8504.9090
(15) Capacitors / 8532.9090
condensers 4mkv-
20mkv 1 000-660v.
(16) Selector switch. 8536.5090
(17) Plugs andsocketupto 8536.6900
250v / upto 250a.
(18) Contactors 3.2a- 250a 8536.9090
/ 24-41 5v.
(19) Fuse base! caps / 8536.9090
adapters / fuse collar.
(20) Screw safety insert 35 8536.9090
to 150amps.
(21) Terminals. 8503.0090
(22) Pyrometer element. 9025.8090
(23) Diesel Engines above 8408.9000
85 HP.
33. Digital radio system Parts which are to be used 8529.9090 0% ad val. Nil.
for access and solely or principally with the
mQbile network. apparatus of heading 85.25
to 85.28.
34. Disposable (A) Disposable syringes 5 % ad val. Nil
syringes, needles and needles
and l.V. Cannula.
(1) Printing ink. 3215.1110
(2) Epoxy bond. 3506.1090
(3) Pvc (medical grade). 3904.1090
(4) Plastic film (medical 3920.2040
grade). 3921 .9090
(5) PVC gaskets. 3923.5000
(6) Silicon oil. 3910.0000
(7) Rubber gaskets. 4016.9310
(8) Paper labels. 4821.1000
(B) IV Cannula. 5 % ad val. Nil
(1) Needles 901 8.3200
(2) Membrane Filter 4823.2000
Paper
(3) Teflon Tubes 3917.2100
(4) Blister Paper 4802.0000
35. Dry battery cells. Raw materials 0 % ad val. Nil
(1) Natural manganese 2530.9010
dioxide.
(2) Acetylene black. 2803.0020
(3) Electrolytic 2820.1010
manganese dioxide.
(4) Ammonium chloride. 2827.1000
(5) Zinc chloride. 2827.3600
(6) Mercuric chloride. 2827.3990
(7) Electrolytic paper. 4811.9000
(8) Zinc slugs. 7907.0010
(9) carbon rods. 8545.9020
36. Dyes stuff and Raw materials.
chemicals. (1) Cresylic acid. 2707.6000 10% ad val. Nil
(2) Creosote oil. 2707.91 00
(3) Petroleum jelly. 2712.1 000
(4) Sodium sulphate. 2833.1100
(5) Napthalene. 2902.9010
(6) Glycerol. 2905.4500
(7) Formicacid. 2915.1100
(8) Shell Sol A100 2707.5000
(9) Shell Sol D 70 271 0.1999
(10) Diazo, aroor-azoxy- 2927.0010 5% ad val.
compounds.
37. Electric bulbs. Raw materials. 5 % ad val. Nil
(1) Additive adhesive 3824.9099
(2) Borax decahydrate 2840.1900
(3) Getter for bulbs 2835.3900
(4) Marble powder 251 7.41 00
(5) Stamping paste or 321 5.1990
marking Ink 321 5.9010
38 Tube light Raw materials 5 % ad val. Nil
(1) Additive Adhesive 3811.9000
(2) Prepared binders 3824.9099
(3) Aluminium sheet or 7606.1200
strip in coils.
(4) Bakelite (sheet 3921.1100
or/strip)
(5) Borax decahydrate 2840.1900
(6) Brass pin 741 5.1000
(7) Butyl acetate 291 5.3300
(8) Emmission carbonate 3824.9099
(Triple oxide)
(9) Ethyl acetate 2915.3100
(10) Nitrocellulose 3912.2010
(11) Stamping paste or 3215.1910
marking Ink 321 5.9010
(Fluorescent)
39 Tube light caps Raw materials 0% ad val. Nil
(1) Vulcanized fiber 3920.7200
(2) Brass wire 7408.2100
(3) Brass pin 741 5.1000
(4) Aluminum sheet/strip 7606.1200
in coils.
(5) Bake-light (Phenolic 8546.9000
laminated! epoxy)
(6) Insulating fitting (glass 8547.9000
coated)
40. Electric Meters Raw materials 5% ad val. Nil
(1) Aluminium Sheet/Strip 7606.1200
(2) Copper Enamelled 8544.1110
Wire AWG No 34 & 37 8544.1190
(of dia 0.12mm to
0.4mm)
(3) Copper Strip/Sheet 7409.1100
(4) Electrophoretic Paint 3208.9090
(Water based)
(5) Epoxy Resin 3907.3000
(6) Nylon Moulding 3908.1000
Compound
(7) Phenolic Moulding 3909.4000
Powder
(8) PPO Resin 3908.1000
(9) Stainless Steel Strip 7211.1990
(10) Stamping Foil 3212.1000
Sub-components and
Components
(11) Adjustable Rivets 7415.3900
(12) Lag Plate 9028.9020
(13) Rivets 9028.9020
(14) Screws Nickle Plated 731 8.1400
(15) Self Tapping Screws 731 8.1400
(16) Tap Tite Screws 7318.1400
41 Electrical Capacitors Raw materials 5% ad val.
(1) Aluminum Foil (99.9% 7607.1100
purity electrolytic
grade, plain and
etched)
(2) BOPP Film (Metalized 3920.2030
capacitor grade)
(3) BOPP Film (Plain 3920.2010
capacitor grade)
(4) Capacitor 391 0.0000
Impregnation Oil
(5) Epoxy Resin 3907.3000
(6) Hardener 3824.9030
(7) Insulating Paper 4823.9090
(8) Molding Resin for 3903.1900
capacitors 3907.9900
(9) Polyester / 3920.2090
Polypropylene seal
Film
(10) Polyurethane Resin 3907.3000
(11) Vermiculite Exfoliated 6806.2000
(12) Zinc Tin Alloy Wire 7904.0010
(13) Zinc Wire 7904.0010
Sub-components and
Components 10% ad val.
(14) Supporting Kernels 8532.9090
(15) Silicon Rubber Seals 401 6.9200
(16) Insulating Cover 8546.9000
Sleeve
42 Industrial
Switchgears & High Raw materials
Voltage Electrical 5/0 ad val.
Switches
(1) Cold Rolled Steel 7209.2590
Sheet less than
0.5mm
(2) Dyes 3204.1700
Sub-components and
Components 10% ad val.
(3) Bulbs upto 20 watts 8539.2990
(4) Capacitor Trip Units 8536.9090
(5) Combined Electronic 9028.3000
Meter
(6) Fuses 8536.1000
(7) Switches (not 8535.3010
domestic) 8536.5090
(8) Transformers upto 1 8504.31 00
KVA
43. Electronic Raw materials. Respective 5% ad val. As
diagnostic, Sub-components and headings. recommended
monitoring and components, by the
laboratory Sub-assemblies. Engineering
equipments for Development
medical use. Board (EDB).
44. Eyelets. Raw material. 10% ad val. Nil
Copper strips 7409.1900
45. Flat-rolled products Raw material.
of iron or non-alloy
steel plated or CRC sheets of thickness of 5% ad val.
coated with zinc, less than 0.5 mm
46. Footwear.
Raw materials. 5% ad val. Nil
(1) Masterbatch. 3204.1700
(2) PU paints. 3208.9090
(3) Release agents. 3403.1990
(4) Wax cream. 3405.1010
(5) Shoe adhesives. 3506.9100
(6) Isocyanate. 3824.9099
(7) Desmodurre. 3824.9099
(8) Toe puff material. 3921.9090
(9) Fibre board. 4411.3900
(10) Insole board. 4811.5990
(11) Combrallalining 5603.1300
material.
(12) Shoe reinforcement 5906.1000
tapes.
(13) Thermoplastic Rubber 4005.0000
/ Compounded
Rubber
(14) Shoe Lasts (Plastic) 3926.9060
(15) Shoe Elastics 5604.9000
(16) Shoe Eyelets 8308.1020
(17) Parts of footwear of 6406.9900
47. Shoe adhesive other materials
manufacturing Raw material 5% ad val. Nil
(1) Rubber chloroprene 4002.4900
48. Formic acid. Raw material.
Sodium hydro oxide
281 5.1200 (caustic soda in
aqueous solutions
(soda lye or liquid
soda)}.
49. Grinding Wheel. Raw material 5% ad val. Nil
Glass fiber disc 701 9.90900
50. High Pressure Raw materials
Laminate (Formica) 5% ad vaI. Nil.
and Low Pressure (1) Printed decorative 4811.9000
Laminates, paper
(2) Plain decorative 4805.9190
paper
(3) Saturating kraft paper 4804.3100 The import of
Saturating kraft
paper is allowed
for High Pressure
Laminate
(Formica) only.
51. Insulators. Component. 10% ad val. Nil
Caps 7325.9900
52. Interlining fabrics. Raw material. 10% ad val. Nil
Melamine resin 3909.2000
53. Leather Tanning Raw material
(Chromium 5% ad val. Nil
sulphate) Sodium dichromate
54. LPG tanks, gas Raw materials 2841.3000
pressure regulators, Respective 5% ad val. As
bowzer and headings recommended
cylinder. by the
Sub-comDonents and Respective 1 0%ad val. Engineering
components. headings Development
Board (EDB)
55. Manufacture or Raw materials. 2707.91 00
formulation of 2707.9990 5% ad val. Nil
Agricultural (i) oils and other products of 2707.5000
pesticides by distillation of high 271 0.9900
manufacturers or temperature, coal-tar and
formulators duly similar products in which the
recognized and weight of the aromatic
approved by the constituents exceeds that of
Ministry of Food and non-aromatic constituents.
Agriculture.
(ii) Following active 0 % ad val.
ingredients for pesticides
registered by the Department
of Plant Protection
under the
Agricultural Pesticides
Ordinance, 1971 (II of 1971),
stabilizers, emulsifiers and
solvents:-
(1) Xylol (xylenes) 2707.3000
(2) -Beta Pinene/ 2902.1990
Agrotin 527 / Terpenic
derivative
(3) Toluene 2902.3000
(4) Mixed xylene isomers 2902.4400
(5) Naphthalene 2902.9010
(6) Solvesso-i 00, 150, 2902.9090
200
(7) Ingredients for 2903.3040
pesticides
(8) Cadusafos Technical 2903.6900
Material
(9) Methanol (methyl 2905.1100
alcohol)
(10) Propylene glycol 2905.3200
(propane-i, 2-diol)
(11) - Adhesives Polyvinyl 2905.4900
Acetate
- Polyvinyl Alcohol
(12) Ingredients for 2906.2910
pesticides
(13) Other Ingredients for 2906.2990
pesticides
(14) - Solvenon MP /1- 2909.4910
Methoxy 2-Propanol
- Methyglycol Acetate
(15) Methanal 2912.1100
(formaldehyde)
(16) Cyclo-hexanone and 2914.2200
methyl- cyclo-
hexanones
(17) - Cyclohexanon 2914.2990
- Cyclohexanone
Mixed petroleum
Xylene(l,2 & 1,3 &
l,4dimethylbenzene
and ethyle benzene)
(18) Acetic anhydride 2915.2400
(19) Ingredients for 291 6.3920
pesticides
(20) Dioctyl 2917.3200
orthophthalates
(21) Ingredients for 2918.9010
pesticides
(22) Ingredients for 2919.0010
pesticides
(23) Other Ingredients for 2919.0090
pesticides
(24) Endosulfan Technical 2920.9020
Material
(25) Other Ingredients for 2920.9090
pesticides
(26) Diethylamine and its 2921.1200
salts
(27) Ingredients for 2921.4310
pesticides
(28) Other Ingredients for 2921.4390
pesticides
(29) Ingredients for 2921 .5110
pesticides
(30) Triethanolamine and 2922.1300
its salts
(31) Dimethyl Formamide 2924.1990
(DMF)
(32) Ingredients for 2924.2930
pesticides
(33) Other Ingredients for 2924.2990
pesticides
(34) Alpha cyano, 3- 2926.9010
phenoxybenzyl (-) cis,
trans 3-(2,2-diclord
vinyl) 2,2 dimethyl
cyclopropane
carboxylate
(35) (5) Alpha cyano, 3- 2926.9020
phenoxybenzyl (S)-2-
(4, chloro phenyl)-3
mehtyl butyrate
(36) Cyano, 3-phenony 2926.9030
benzyl 2,2,3,3 tetra
methyl cyclopropane
carboxalate
(37) - Cypermethrin, Alpha 2926.9050
Cypermethrin, Beta-
Cypermethrin, Zeta-
Cypermethrin,
Lambda Cylalothrin,
Deltamethrin,
Fenpropathrin,
Esfenvalerate,
Bit enthrin
Technical Material-
Acetamiprid,
Imidaclopna
Technical Material-
Monomehypo,
Chlorothalonil
Technical Material-
Bromoxynil Technical
Material
(38) Other nitrite 2926.9090
compounds-
Cyfluthrin, Beta
Cyfluthrin Technical
Material
(39) 2-N, N-Dimethyl 2930.2010
amino-I sodium
thiosulphate, 3-
thiosulfourropane
(40) Ingredients for 2930.2020
pesticides
(41) 2- N,N-dimethyamino 2930.9010
1,3 disodium
thiosulphate propane
(42) O,S-dimethyl 2930.9020
phosphoramidothioate
(43) S-S (2 dimethyl amino 2930.9030
(trimethylene) bis (thio
carbamate)
(44) Diatethiuran technical 2930.9040
(itertbutyl) 3-2-6
disopropyl (4-
phenoxyphenyl)
thiourene
(45) 0-0 diethyl O-(3,5,6 2930.9050
trichloro pyridinyl)
phosphorothioate
(46) O-(4-bromo, 2-chloro 2930.9060
phenyl) 0-ethyl S-
propyl
(phosphorothioate)
(47) 0,0 duethyl O-(3,5,6- 2930.9070
trichloro 2-pyridyl)
phosphorothioate
(48) Ingredients for 2930.9080
pesticides
(49) Other orgonosulpher 2930.9090
compounds
- Ethion,
Methamidophos
Technical Material
- Dimethysulfoxid
(50) Ingredients for 2931.0010
pesticides
(51) Other Ingredients for 2931.0090
pesticides
(52) Ingredients for 2932.2920
pesticides
(53) 2,3 Dihydro 2-2 2932.9910
dimethyl-7 benzo
furanyl methyl-
carbamate
(54) Other ingredients for 2932.9990
pesticides
- Carbosulfan
Technical Material
(55) Ingredients for 2933.3930
pesticides
(56) Other Ingredients for 2933.3990
pesticides
(57) - Chlorpyrifos, 2933.5950
Triazophos, Diazinon
Technical Material
(58) Other Ingredients for 2933.5990
pesticides
(59) Pyrimethanine 2933.6910
(60) Ingredients for 2933.6940
pesticides
(61) - Atrazine Technical 2933.6990
Material
(62) Isatin (lactam of istic 2933.7910
acid)
(63) 1 -Vinyl-2-pyrrol-idone 2933.7920
(64) - Triazophos 2933.9910
Technical Material
(65) Ingredients for 2934.1010
pesticides
(66) Ingredients for 2934.9920
pesticides
(67) -Methyl benzimidazol 2938.9010
-2 - ylcarbamate.
-Dicopper chloride
trihydroxide
(68) Ingredients for 2939.9910
pesticides
(69) - Abamectin, 2941.9050
Emamectin Technical
Material
(70) Other Ingredients for 2941.9090
pesticides
(71) Sulphonic acid (Soft) 3402.1110
(72) Other surface active 3402.1190
agents
(73) Catonic 3402.1290
(74) Non ionic surface 3402.1300
active agents
(75) Other organic surface 3402.1990
active agents 3402.9000
(76) Chemical 3824.9099
preparations
56. Master Batches Pigments, dyes, additives,
fillers, resins. 5 % ad val. Nil
(1) Iron Oxide. 2821.1010
(2) Other carboxylic acids. 2918.2900
(3) Other Pigments. 3206.2090
(4) Ultramarine. 3206.4100
(5) Lithophone. 3206.4210
(6) Aluminium Paste & powder. 3212.9010
(7) Non-Ionic surface active age 3402.1300
(8) Other surface active agent. 3402.1900
(9) Prepared wax. 3404.9010
(10) Other prepared wax. 3404.9090
(11) Other Binders. 3824.9099
(12) Other polymers of styrene. 3903.1900
(13) Polymethy Methacrylate. 3906.1000
(14) Other Acrylic Polymers. 3906.9090
(15) Other Polyacetals. 3907.9900
(16) Polyamides. 3908.1000
(17) Dispersing agent. 2835.3900
2905.4400
2912.1900
2905.4500
(18) Collodium wool (NC). 3912.2090
(19) Alcoprint (thickeners). 3809.9100
(20) White oil. 2710.1996
(21) Silicone oil. 3910.0000
(22) Enzymes. 3507.9000
(23) Acids Dyes and Prepration 3204.1200
(24) Pigments and Preprations 3204.1700
(25) Brightening Agent 3204.2000
(26) Chrome yellow Pigments 3206.2010
Pigments
57. Medical equipment Raw materials, sub- Respective 0 % ad val. As
as follows:- components and components Headings recommended
by the
(I) Dialysers Engineering
(ii) Blood Tubing Development
lines for dialysis Board (EDB)
comprising of Arterial
& Veinous lines
(iii) Arterial &
Veinous
Fistula
Needle sets
comprising
Arterial and
Veinous
Lines.
58. Medical Diagnostic Raw material. 10% ad val. Nil
Sticks.
Composite diagnostic 3822.0000
re-agent.
59. Metallic yarn! Raw materials. 5% ad val. Nil
Powder
(1) Epoxy amino resin 3907.3000
(2) Un-coated polyester 3920.6200
film
(3) Aluminium wire 7605.1900
60. Oil refining (mineral Raw materials, sub- Respective 0 % ad val. As
oil! hydro-cracking components, components, headings recommended
and other value sub-assemblies and by the
added petroleum assemblies, Engineering
products). Plants for Development
petro-chemical! Board (EDB)
petro-chemical
down stream products
(including fibers), Cool
chain plants, Plants
for heavy chemical
industry.
61. OIeo-chemical/ Raw materials. Nil
Stearic acid.
(1) Palm stearin. 1511.9010 5 % ad val.
(2) Crude soya-bean oil. 1507.1000 10% ad val.
(3) Crude palm oil. 1511.1000
(4) Crude coconut oil. 1513.1100
(5) RBD coconut oil. 151 3.1900
(6) Palm acid oil. 3823.1920
(7) Palm kernel acid oil. 3823.1 990
(8) Inedible Animal or 151 8.0000
Vegetable Oil and
Fats.
62. Paper and Paper Raw material. 15% ad val. Nil
Board.
Cationic potato starch 3505.1090
63. Printed circuit Raw materials. 5 % ad val. Nil
boards.
(1) Accelerator. 3824.9099
(2) Ammonical Etchant 3824.9099
(Various Types).
(3) Aluminium Entry or 7607.2000
Exit Foil.
(4) Anti Foam. 3824.9099
(5) Carbon Conductive 3215.9090
Ink.
(6) Carbon Ink Retarder 3814.0000
or Thinner.
(7) Connector (Fpc). 8536.6990
(8) Diazo Film. 3701.3090
(9) Etch Resist Ink. 321 5.9090
(10) Etch Resist Ink 3814.0000
Thinner or Retarder
(11) Gold Plating Tape. 3919.9000
(12) Identification or 3814.0000
Legend Ink Retarder
or Thinner.
(13) Identification or 321 5.9090
Legend Ink (Various
Parts).
(14) Jig Stripper. 3824.9099
(15) Line or Laser Plotter 3701.3090
Film.
(16) Screen Adhesive. 3506.91 90
(17) Screen Cleaner. 3814.0000
(18) Screen Mesh. 5911.2000
(19) Silver Ink. 321 5.9090
(20) Silver Ink Thinner or 321 5.1900
Retarder.
(21) Solder Mask/Resist 3215.9090
Ink (Various Parts).
(22) Solder Mask or Resist 3814.0000
Thinner or Retarder.
(23) Squeegee (of 3921.1300
polyurethane) Blade.
(24) Test Probes And 7319.3000
Recepticles.
(25) Tin or Lead Stripper 3824.9099
(Various Parts).
(26) Enamelled wire. 8544.1110
64. Printing ink. Raw materials. 10% ad val. Nil
(1) Organic pigments. 3204.1700
(2) Resins. 3912.2090
(3) Driers. 3211.0090
(4) Other 3906.9090
-Acrylic Co-polymer
emulsion (Binder
Interlining)
65. PVC Compound Raw materials. 5% ad val. Nil
Industry.
(1) Pigments 3204.1700
(2) Chlorinated paraffin 3824.9080
(for PVC compound)
(3) Ethylene dichloride 2903.1500 0% ad val.
(EDC)
(4) VCM 2903.2100
(5) Ethylene 2902.21 00
66 Refrigerated Raw materials, Respective 5%ad val.. As
vehicles and chillers Sub-components and Headings 10% ad val. recommended
for milk storage. components. by the
Engineering
Development
Board (EDB).
67. Refining of Crude Raw material. If imported by
Palm Oil fully operational
Crude palm oil. 1511.1000 Rs 9000!PMT Crude Palm Oil
refineries.
68. Ribbons for Raw materials. 1 0°/ ad val Nil
Typewriter/computer
printers. (1) Nylon fabrics. 5903.9000
(2) Polyethylene film. 3920.1000
(3) Empty cartridges. 3926.9090
69. Rubber V-Belt Raw material.
Polyester cable cord. 5607.5000 10% ad val. Nil
70. Seamless pipes. Raw materials. 0% ad val. Nil
(1) Special steel round 721 4.9900
bars and rods of non-
alloy steel exceeding
diameters 75 mm.
(2) Lubricating anti-rust 3403.9990
and anti-corrosion
preparation.
71. Security Printing Ink Raw material 10% ad val. If imported for
use in printing of
Phenolic modified alkyd 3907.5000 currency notes.
resin
72. Solar cells, panels, Raw materials. Respective 5%ad val. As
modules. Headings recommended
Sub-components and 10% ad val. by the
components. Engineering
Development
Sub-assemblies. 15% ad val. Board (EDB)
73. Toilet Soap Raw materials. 10% ad val. Nil
Industry.
(1) Palm stearin. 1511.9010
(2) Coconut crude oil. 1513.1100
(3) Crude palm kernel oil. 151 3.21 00
(4) Cresylic acid. 2707.6000
(5) Surface active agents. 3402.0000
74. (1) Sugar mill. Raw materials, Respective 0 % ad val. Supplies to the
(2) Cement plant. Sub-components and Headings export sector
(3) Plants for the Components, (PCT headings
production of such inputs
industrial including raw
chemicals. materials and
(4) Thermal other articles
power plant. even
(5) Hydel Power manufactured
Plant. locally as
(6) Fertiliser indicated by the
plants. EDB)orto
(7) Heat exempt
exchangers, industrial units,
pressure projects, and
vessels, agencies or
Coloumns, imported by
filters, recognized local
production manufacturers
separators, of Heavy
coolers and Engineering
boilers. Goods.
(8) Machinery for
the
manufacture
of surgical
goods, sports
goods and
stuffed toys.
(9) Machinery
supplied to
the approved
manufacturers
/ assemblers
of vehicles,
capital goods,
electronics
equipment
and system,
consumer
durable items
and auto
parts.
(10) Marble
processing
industry.
(11) Steel
pipes/tubes
industry.
(12) Plant,
machinery
and
equipment as
in Tables of
Notification
No SRO.
439(I)/2001,
dated the 18th
June 2001.
(13) Machinery
and capital
goods or
engineering
goods meant
for export.
(14) Textile
machinery.
(15) Certain types
of oil and gas
development
plants.
(16) Machinery, Supplied to
equipment, electric power
intermediary generation ie
or capital oil, gas, hydel,
goods and coal, wind and
specialized wave energy
vehicles (4 x 4 projects, their
non luxury) expansion or
excluding modernization,
passenger including under
vehicles, construction
projects, and
captive power
projects.
(17) Machinery, Supplies against
equipment, international
vehicles and tender to the
intermediary projects
or capital financed out of
goods. international
loan or aid
giving agencies.
(18) Any other
industrial plant
recommended
and approved
by
Engineering
Development
Board and the
Central Board
of Revenue.
75 Telephone sets, fax Raw materials. Respective 5 % ad val. As
machines, Headings recommended
speakers, small Sub-components and 10% ad val. by the
transformers, components. Engineering
telecommunication Development
equipments, Sub-assemblies. 10% ad val. Board (EDB)
electronic
exchanges, PABX
/digital switching
equipments.
76 Telecommunication Parts which are to be used 851 7.9000 0% ad val. Nil
apparatus for with the apparatus of heading
Carrier Current Line 8517.5000, 8517.8030 and
Systems or for 8517.8090.
Digital Line
Systems.
77. Textile Machinery, Raw materials, Respective 0% ad val. If imported by
parts and Sub-components and Headings local
components components, assemblers!
thereof. Sub-assemblies and manufacturers
assemblies, duly recognized/
recommended
by EDB.
78. (1) Plastic Raw materials, Sub- Respective 0% ad val. If imported by
Injection components, headings local assemblers
Moulding Components and Sub- or
Machines. assemblies manufacturers
(2) Pressure Die duly recognized
Casting or
Machine, recommended
(3) CNC Machine by EDB giving
Tools. input-output
ratios.
79. (1) CNC Raw materials, Sub- Respective 0% ad val. If imported by
machinery for components, Components headings local assemblers
metal cutting and Sub-assemblies, or
and forming. manufacturers
duly recognized
or
recommended
FDB
(a) Machining centers (All
types).
(b) Turning centers (All
types).
(c) Others.
(2) CNC Plastic
Injection
Moulding
Machines.
(3) CNC Blow Moulding
Machines.
(4) CNC
Extrusions
Lines.
80. Thermosetting Raw materials. 10% ad val. Nil
powder.
(1) Epoxide resin. 3907.3000
(2) Leucite: nepheline 2529.3000
and nepheline
syenite.
(3) Calcium carbonate. 2836.5000
(4) Polyester resins in 3907.9900
chip! granual form.
(5) Exfoliated vermiculite, 6806.2000
expanded clays,
foamed slag and
similar expanded
mineral materials
(including
intermixtures thereof).
81. Tyres and tubes. Raw materials 0% ad val. Nil
(1) Antioxidents! 2921.5190
antiozonants.
(2) Rubber accelerators! 381 2.1000
retarders.
(3) Rubber natural. 40P1 .2100
4001.2200
4001.2900
(4) Rubber- synthetic. 4002.1900
4002.2000
4002.3100
4002.3900
4002.7000
(5) Nylon tyre cord 5902.1000
fabrics.
(6) Polyester tyre cord 5902.2000
fabrics.
(7) Bead wire. 721 7.3010
(8) Brass plated steel tyre 7312.9010
cords.
82. Tufted carpets. Raw materials. Nil
(1) Thickners. 3906.9090 5% ad val.
(2) Woven fabrics of 5407.2000 5% ad val.
synthetic filament yarn.
(3) Felt backing. 5603.9300 5% ad val.
83. Television sets. CKD kits for assembly and The in-house
Under EEPAS manufacture of TV sets, facility for
comprising of following:- television sets
manufacturing
shall include the
following:-
(1) Picture tube for 8540.1100 0% ad val. I) Mounting belt
colored TV.
(2) Picture tube for black 8540.1200 ii) Soldering
& white TV. machine
(3) Rubber tube (cut to 4009.1100 5% ad val. iii) Jigs for
size). technicians
(4) Screws. 7318.2200 iv) White
balance adjuster
(5) Eyelet. 8308.1020 v) Pattern
generators-
PAL/ Secum/
NTSC
(6) Solder wire. 8311.3000 vi) Cross Hatch
Pattern
Generator
(7) Fly back transformer. 8504.3100 vii) Red Pattern
Generator
(8) Coil. 8504.5000 viii) Microscope
for Purity
Adjustment.
(9) Battery. 8506.9090
(10) Speaker. 8518.2200
(11) Core. 8528.1290
(12) Transmitter r!c. 8529.1090
(13) Filter. 8532.2900
(14) Capacitor. 8532.3000
(15) Board, PCB. 8534.0000
(16) Fuses. 8536.1000
(17) Switch. 8536.5090
(18) Socket CPT. 8536.6910
(19) Inductor exil 8544.5100
Iead,wire, cord, cable
assembly, lead set,
lead wire.
(20) Thermister 8533.2900
(21) Resister 8533.2900
(22) Resonator 8529.9090
(23) Holder 8536.6100
(24) Deflection yok 8540.9100
(25) Diode 8541 .1000
(26) Transistor 8541 .2100
(27) IC 8542.9000
(28) Connector 8536.9090
(29) Adopter, Adhesive 8529.9090
tube, Ana band tube,
Antenna, Back cover,
Band, Base, Bracket,
Button, CA mask,
Cap, Case, Chassis
Assembly, Cover
Dom, Cover Mini,
Cover shield, Cover
speaker, Clip plug,
Clamps, Cover tuner,
CPM, CPT earth,
Crystal, Cushion,
Decoration, Delay line
insulator, Flux, Focus
pack, Frame, Fixture,
Handle, Heat sink,
Hook, Inductors, Jack,
Led, Leg, Lens, Link,
Magnet, Mark, Mirror,
Nuts, Panel-Metal,
Piece, Pin, Plate,
Plate compensation,
Preamp, Sheet
mechanism, Shield,
Silicon, Socket IC,
Socket Speaker Gap,
Speaker grill, Speaker
tweeter tape, Spring,
Stopper, Supporter,
Tie, Tuner, Varistor,
Washer, Wedge,
Window, Window NB,
Wafer, Wax, Wrap.
84. Under EEPAS. (I). Raw materials, sub- Respective 5% ad val. As
Cellular mobile components, components headings recommended
phones; Laser video for the electronic by the
disc players; DVD apparatus. Engineering
player, VCD player; Development
VCP (Video Board (EDB)
Cassette Player);
VCR (Video
Cassette Recorder); (ii). SKD Kits For Assembly Of 10% ad val. (i) The imported
Compact disc Microwave Ovens, VCP, SKD kits shall
player; Stereo car VCR, VCD, DVD consist of more
cassettes players; Apparatus And Plasma than seven
Hi-fi system; Pocket T.V. Sets/LCD Panel components.
size cassette player; Sets Under "Emerging
CD players; Radio- Electronics Products (ii) The imported
cum-cassette Assembly Scheme" SKD kits would
player; Radio; (EEPAS). not contain
Electronic packing
calculator; materials, carton
Microwave ovens; boxes,
Caller Line brochures and
Identification (CLI) the printed
apparatus, Plasma materials.
T.V sets/LCD Panel sets.
(a) Microwave Oven.
(1) Screw set. 731 8.1400
(2) Main chassis and 8516.9000
frame with motor.
(3) Power supply assy. 8504.5000
(4) Main mounted circuit 8516.5000
board.
(5) Cover top. 8516.5000
(6) Door assembly. 851 6.5000
(7) Display with mounted 8516.5000
circuit board.
(8) High voltage block 851 6.5000
assembly.
(9) Lamp. 8539.2200
(10) Accessories. 8516.5000
(11) Magnetron. 8540.7100
(12) Mechanical Timer. 9106.9000
(b) Car Cassette/Compact
Disc Player.
(1) Screw sets. 7318.1400
(2) Transformer. 8504.3100
(3) Speaker with box. 8518.2200
(4) Cable with connector. 8544.5100
(5) Accessories. 8529.9090
(6) Braket. 8529.9090
(7) Rear cover assy. 8529.9090
(8) Remote control. 8529.9010
(9) Main frame or chassis 8529.9090
with top cover.
(10) Nobs and buttons. 8529.9090
(11) Front panel assy with 8529.9090
mounted circuit board.
(12) Mechanism assy with 8529.9090
motor and head.
(c) Hi Fi System
(1) Screw sets. 731 8.1400
(2) Transformer. 8504.3100
(3) Speaker with box. 8518.2200
(4) Cable with connector. 8544.5100
(5) Accessories. 8529.9090
(6) Braket. 8529.9090
(7) Rear cover assy. 8529.9090
(8) Remote control. 8529.9010
(9) Main frame or chassis 8529.9090
with top cover.
(10) Nobs and buttons. 8529.9090
(11) Front panel assy with 8529.9090
mounted circuit board.
(12) Mechanism assy with 8529.9090
motor and head.
(d) Stereo Cassette/Stereo Car
Cassette Player.
(1) Screw sets. 731 8.1400
(2) Transformer. 8504.3100
(3) Speaker with box. 8518.2200
(4) Cable with connector. 8544.5100
(5) Accessories. 8522.9000
(6) Braket. 8522.9000
(7) Rear cover assy. 8522.9000
(8) Remote control. 8522.9000
(9) Main frame or chassis 8522.9000
with top cover.
(10) Nobs and buttons. 8522.9000
(11) Front panel assy with 8522.9000
mounted circuit board.
(12) Mechanism assy with 8522.9000
motor and head.
(e) Radio Cassette
Player.
(1) Screw sets. 731 8.1400
(2) Transformer. 8504.3100
(3) Speaker with box. 8518.2200
(4) Cable with connector. 8544.5100
(5) Accessories. 8529.9090
(6) Braket. 8529.9090
(7) Rear cover assy. 8529.9090
(8) Remote control. 8529.9010
(9) Main frame or chassis 8529.9090
with top cover.
(10) Nobs and buttons. 8529.9090
(11) Front panel assy with 8529.9090
mounted circuit board.
(12) Mechanism assy with 8529.9090
motor and head.
(f) Pocket Size Cassette
Player.
(1) Screw sets. 731 8.1400
(2) Transformer. 8504.3100
(3) Speaker with box. 8518.2200
(4) Cable with connector. 8544.5100
(5) Accessories. 8522.9000
(6) Braket. 8522.9000
(7) Rear cover assy. 8522.9000
(8) Main frame or chassis 8522.9000
with top cover.
(9) Nobs and buttons. 8522.9000
(10) Front panel assy with 8522.9000
mounted circuit board.
(11) Mechanism assy with 8522.9000
motor and head.
(g) DVD I VCD Player.
(1) Screw sets. 731 8.1400
(2) Transformer. 8504.31 00
(3) MPEG card. 8522.9000
(4) Metal case. 8522.9000
(5) Loader. 8522.9000
(6) Panel with PCB & 8522.9000
Card.
(7) Power board. 8522.9000
(8) Remote control. 8522.9000
(9) Inner connector. 8536.9090
(10) Outside connector 8536.9090
(AC, AV, RF cable).
(h) Plasma Display Panel!
Liquid Crystal
Display Panel
(1) Screw sets. 731 8.1400
(2) Speaker. 851 8.2200
(3) Front cabinet assy. 8529.9090
(4) Filter or plasma 8529.9090
display panel
protector.
(5) Rear cover assy. 8529.9090
(6) Plasma display 8529.9090
control unit.
(7) Printed circuit board. 8534.0000
(8) Plasma display panel 8529.9090
/LCD Panel.
(9) AC cable accessories. 8544.5100
(i) Car Audio System
(1) Remote control. 8529.9010
(2) DC cord. 8529.9090
(3) Housing. 8529.9090
(4) Top plate. 8529.9090
(5) Chassis (bottom 8529.9090
plate).
(6) Cassette mechanism 8529.9090
assy.
(7) Front sub-panel. 8529.9090
(8) Front panel assy. 8529.9090
(9) Front panel cover. 8529.9090
(10) Insulating sheet. 8529.9090
(11) Heat sink. 8529.9090
(12) Heat sink spacer. 8529.9090
(13) Misc. Hardware. 8529.9090
(14) PC board. 8534.0000
85. Mobile phones, (A) CKD kits for 0% ad val. If imported by
Payphones, WLL assembly of mobile local
phones, CDMA phones assemblers!
phones, manufacturers
GSM phones. (B) Following CKD Kits 5% ad val. duly approved
for assembly of by the
Payphones, WLL Government of
phones, CDMA Pakistan.
phones & GSM
phones,
(1) Buzzer. 8531:8000
(2) Bobbin. 8529.9090
(3) Choke. 8536:9090
(4) Clamp. 8536:9090
(5) Core. 8536:9090
(6) Card reader. 8529:9090
(7) Connector. 8536:9090
(8) Diac. 8529:9090
(9) Capacitor. 8532:2900
(10) Switch. 8536:3090
(11) Fuse. 8535:1000
(12) Fuse holder. 8535:9000
(13) Relay. 8535:9000
(14) Transducers. 8529:9090
(15) Trimpot. 8529:9090
(16) TVS. 8529:9090
(17) VDR. 8529:9090
(18) LCD display 8529:9090
character.
(19) LCD display graphic. 8534:0000
(20) Antenna indoor. 8529:9090
(21) CDMA module. 8529:9090
(22) GSM module. 8529:9090
(23) WLL module. 731 8:1900
(24) Nut. 7318:1590
(25) Screw. 3926:9099
(26) Sealed lead acid 8507:2000
batteries.
(27) Nickle metal hydride 8507:8000
batteries.
(28) AC-DC adopters. 8504:5000
(29) Discreet components 8529:9090
for module.
(30) Coaxial cable. 8544:4990
(C) Kits for CDMA Fixed 5% ad val.
Wireless Terminals
(FWT).
(1) Hook 3926.9099
(2) Casing material 3926.9099
(3) AC DC Adopters 8504.5000
(4) Sealed lead acid 8507.2000
batteries
(5) Coin cell 8507.8000
(6) Cap Asay 8517.9000
(7) Discrette component 8529.9090
for module
(8) Buzzer 8531.8000
(9) Capacitor! Miniature 8532.2900
capacitors
(10) Fuse 8535.1000
(11) Voltage reference 8535.4090
(12) Relay 8535.9000
(13) Switch 8536.3090
(14) Socket (Different 8536.6990
type)
(15) Connector 8536.9090
(16) Coaxial cable 8544.4990
(17) Hook switch 3926.9099
(18) Inductor 8504.5000
(19) Nickel metal 8507.8000
hydried/Iithium ion
batteries
(20) Housing Upper 8517.9000
(21) Housing Lowe 8517.9000
(22) Handset cord 8517.9000
(23) Mini speakers 851 7.9000
(24) Pad speakers 851 7.9000
(25) Button menu 851 7.9000
(26) Button OHD 851 7.9000
(27) Button Dial 8517.9000
(28) Button function 851 7.9000
(29) Cap mobile switch 8529.9090
(30) EMI filter, Protector 8529.9090
and Line Termination
for USB (interface
(31) Diac 8529.9090
(32) Transducer 8529.9090
(33) Driver Disk (User 8529.9090
manual USB Driver)
(34) Card Reader 8529.9090
(35) PCB soldering 8529.9090
connector and jack
(36) Heat sink for 8529.9090
transistor to cool
down heating
(37) Antenna cable 8529.9090
assembled module
(38) Charger cum power 8529.9090
supply
(39) Fixed terminal 8529.9090
handset
(40) Keyboard for dailing 8529.9090
function keys
(41) Silicon rubber key mat 8529.9090
(42) Bobbin 8529.9090
(43) Trrimpot 8529.9090
(44) TVs 8529.9090
(45) VDR 8529.9090
(46) LCD display 8529.9090
(47) Antenna indoor 8529.9090
(48) CDMA module 8529.9090
(49) LDO (Low Dropout) 8535.4090
voltage adjuster!
regulator
(50) Voltage varistor 8535.4090
(standard)
(51) Fuse holder 8535.9000
(52) Choke 8536.9090
(53) Clamp 8536.9090
(54) Ferrite core 8536.9090
86. Viscose staple fiber Raw material
Cotton linter 1404.2000 0% ad val Nil
87. Water and waste Raw materials, sub- Respective 0 % ad val. As
water treatment components, components, headings recommended
(purifying / filtering) sub-assemblies and by the
plants, coal firing assemblies, Engineering
systems, gas Development
processing plants Board (EDB)
and oil & gas field
prospecting
88 Effluent Treatment Raw materials. Kespective 0% ad val. If imported by
Plant. headings. local
manufacturers
duly recognized
and recommended
by EDB giving
input-output
ratios.
89. Welded Steel Pipes. Raw materials, sub- 5% ad val. All consumables
component and not
components. manufactured
locally shall be
(1) Hot rolled steel 7208.1090 included in raw
coils/strips, materials.
(2) Coated electrodes of 8311.1000
base metal.
(3) Coated rods and cord 8311.3000
wire.
(4) Copolymer adhesive. 391 0.0000
(5) Welding flux. 381 0.9000
(6) Welding wire. 721 7.9000
90. Wire rope, Wire Raw materials. 5% ad val. Nil
(High Tensile), High
Carbon and pre- High carbon (high tensile) 721 3.91 90
stressed concrete steel wire rod / Alloy steel 7213.9990
wire! strands, Core wire rod.
wire for ACSR
spring wires.
91. (1) Sugar mills up Raw materials, sub- Respective 0% ad val. Provided the
to 10,000 tcd components, components, headings rates of duty
capacity per sub-assemblies, assemblies applicable to
unit. and other items of machinery, equipment and
(2) Cement plants machinery when
up to 4,000 tpd imported as part
capacity per of a complete
unit. industrial plant is
(3) Certain Types 10% or less
of chemical even under any
plants for the other
production of concessionary
industrial notification.
chemicals. Where such
(4) Thermal power duty is higher
plants up to than 10% then
350 MW the exemption in
capacity per customs duty
unit. shall be limited
(5) Hydel Power to a maximum of
plants up to 50 10%. Further,
MW capacity the
per unit. manufacturer is
(6) Certain types recognized
of Oil and Gas prime
development manufacturer-
plants. cum-supplier of
(7) Textile such plants, and
machinery, has suitable in -
(8) Any other house facilities
project for design,
approved by engineering and
the Economic progressive
Co-ordination manufacture of
Committee of such units or
the Cabinet, plants.
92 Cold Rolled Coils Raw materials. 0% ad val. If imported by
(CRC) or G.l sheet! sales tax
coils. Hot rolled coils! 72.08 registered
sheets in prime manufacturers
quality, of CRC / G.l
Zinc oxides. 28.17 sheets or coils.
Chromium oxides. 28.19
93. Milk Chillers. Parts and Components Respective 0% ad val. If imported by
headings local
manufacturers
duly recognized
and
recommended
by EDB giving
input-output
ratios.
94. Phthalic Anhydride orthoxylene 2902.4100 0% ad val. Orthoxylene
shall be
importable till
June 30, 2007.
95. Agriculture diesel
engines (single CKD kit 10% ad val. Nil
cylinder of 12-32
HP). (1) Balancing block. 8409.9999
(2) Camshaft. 8483.1090
(3) Connecting rod assy. 8409.9990
(4) Connecting rod 8483.3010
bearing set.
(5) Cover sets. 8409.9999
(6) Crank shaft. 8483.1090
(7) Cylinder block. 8409.9999
(8) Cylinder head. 8409.9999
(9) Cylinder head cover. 8409.9999
(10) Cylinder liner (of 18- 8409.9999
32 HP).
(11) Fly-weight assy. 8409.9999
(12) Fuel Injection pump. 841 3.3090
(13) Fuel injector. 8413.3090
(14) Gear sets. 8483.4090
(15) Intake/exhaust valve 8409.9999
& spring.
(16) Main bearing set. 8483.3010
(17) Oil pump. 841 3.81 90
(18) Piston (of 18-32 HP). 8409.9999
(19) Piston ring set (of 18- 8409.9999
32 HP).
(20) Set of bushing. 8483.3010
(21) Valve rocker arm 8409.9999
assy.
(22) Water pump. 841 3.81 90
96. Arms and Raw materials. Respective 0% ad val. The import of
Ammunitions. headings. inputs are
Sub-components & 5% ad val. subject to
Components. following
conditions: -
i) The finish
goods shall be
100% exported.
ii) EDB duly approved
the manufacturer and
deletion program as per
scale below:
a) For first five years,
50% components, parts
and accessories to be
locally purchased.
b) From sixth year, the
share of imported
components, parts and
accessories will
annually decrease to
45%, 40%, 30% and
finally 25%.
97. Zippers Raw material. Nil
Brass flat wire 7408.2100 15% ad val.
98. Polyester or Raw material. Nil
synthetic fibre.
Diethylene Glycol 2909.41 00 0% ad val.
(DEG).
99. Aluminum Raw materials. Nil
Processing Industry.
(1) Aluminum sheet 7606.1200 5% ad val.
7606.1100
(2) Ethyl Acetate 2915.3100 10% ad val.
(3) Dyes 3204.1700
(4) Foil Lacquer FL 3208.9090
65105A
(5) Hardner 3208.9090
(6) Terraflex-T 3209.9090
(7) Catalyst SP-561 3814.0000
(8) Degalan P24 3906.9090
(9) Coreactant-F 3907.9900
(10) M.G Sulphite Tissue 4802.5400
& Poster paper from
22 to 40 gsm)
100 Fans. (1) Composite paper and 4807.0000 10% ad val. Nil
paperboard (made by
sticking flat layers of
paper or paperboard
together with an
adhesive), not
surface- coated or
impregnated, whether
or not internally
reinforced, in rolls or
sheets.
(2) Paper & Paper Board 4811.4900
Cellusose Wadding &
Webs of Cullulose
Fibers, Cated,
Impregnated Covered
Surface
101 Recordable Discs Raw materials. 0% ad val. NIL
(CD- R!DVDR!
DVDR-DL (DUAL (1) TFP (Tetrafluoro-l- 2905.5900
LAYER). propanol)
(2) DBE Solvent 2909.1990
(Dibutyle Ether)
(3) DMH Solvent 291 4.1900
((Dimethyl
Heptanone)
(4) DAA (Diacetone 2914.4000
Alcohol)
(5) Isopropanol 291 5.3900
(6) Dye for CD-R, DVDR 3204.1990
& DVDR-DL
(7) Lacquer & UV Bonder 3208.9090
for DVDR
(8) Polycarbonate Optical 3907.4000
Grade
(9) Silver & Silver-Alloy 7115.9000
Target (Creta)
(10) Silicon Target 7202.21 00
(11) Stampers 8523.9000
102. Air Screw Parts and components 5% ad val. NIL.
Compressor
(1) Edge Sealing profile. 4016.9390
(2) Safety lock for IP65 8301.4000
Protection with Keys.
(3) Air end assembly. 841 4.9090
(4) Aluminum fins 841 4.9090
vacuum braced
Combined Heat
Exchanger for Screw
Compressors.
(5) Intake Regulator 8414.9090
Valve Assembly with
Accessories.
(6) De-Oiler with 8414.9090
minimum control
valve & accessories.
(7) Combination block 841 4.9090
with minimum control
valve & accessories.
(8) Oil filter assembly 8414.9090
with thermostatic
control valve
(9) Replacement kit for 841 4.9090
intake regulator, De-
oiler and thermostatic
control valve.
(10) Oil recovery viewer. 8414.9090
(11) Cooling fan for Heat 8414.9090
Exchanger.
(12) Air Cleaner assembly 8414.9090
with bracket, hoses,
service indicator and
accessories for screw
compressors.
(13) Oil separator for 8421.3990
screw compressors.
(14) Line Filters for 8421.3990
Compressed Air.
(15) Salon ide Valve 8481.1000
(16) Transformer 8504.3100
103. Instant Gas Water Parts and components 10% ad val. NIL.
Heater.
(1) Metalic Flexible 8307.9000
connection pipes
(2) Heat Exchange Unit 8419.5000
(3) Gas! Water Valve a
mounting unit
(4) Pilot Assemblyy with 8419.9090
pipe
(5) Electronic ignitor with 8511.8000
connection wires &
sparking Electrodes
(6) Control Box 9032.1090
104. Electric Socket and Parts and components 10 % ad val. NIL.
Switch.
(1) Switch Sockets 8538.9090
(Universal, 5Amp,
13 Amp, 13Zmpx2 and
15Amp)
(2) Terminal Switches 8538.9090
(3) Telephone Socket (2 8538.9090
way & 3 way)
(4) 1 & 2 Gang TV 8538.9090
Splitter with screw
fixing
(5) 20A DP Switch with 8538.9090
Neon
(6) 400V fan control 8538.9090
(7) 500V 1 Gang Dimmer 8538.9090
105 Vehicle Tracking Components Nil
System.
(1) Inductor 8504.9090 5% ad val.
(2) Sealed Lead Acid 8506.5000
Battery
(3) Lithium Cell 8506.5000
(4) Cell Holder 8506.5000
(5) SIM Socket 851 7.9000
(6) GSM Antenna 8529.1010
(7) Capacitor 8532.1000
(8) Glass Fuse 8535.1000
(9) VTS Casing 8538.1000
(10) RF Lead for GPS 8544.4190
106 Electronic Meters. Components Nil
(1) Rubber Key Pad 4008.2900 10% ad val.
(2) Current Transformer, 8504.3100
Flyback Transformer
(3) Capacitor 8532.2900
(4) Connector, 8536.9090
MOV'sNaristors
(5) Ferrite Core 9028.9020
107 Liquid Food Raw materials 5% NIL
Processing Industry
for dairy and juices.
(1) Aluminum foil 7607.2000
(2) Folding carton 481 9.2000
108 Liquid Food Raw materials 5% NIL
Packaging Industry
for dairy and juices.
(1) Aluminum foil plain (in 7607.1100
rolls of 6.3 micron
thickness)
(2) Bleached kraft paper 4804.3900
(3mN/70 gsm)
(3) Clay coated Board 481 0.9900
(80mN/ 1 9ogms,
150mN/226 gsm,
260mN/268gsm)
109 Packaging Industry Raw materials 5% NIL
(1) Aluminum Foil 7607.1100
(2) Polyester film 3920.6200
(3) Laminating adhesives 3909.5000
(4) Rosins(fortified) 3806.2000
110 Bicycle chain Sub-components Respective 0% NIL
manufacturers headings
111. Any other project or Raw materials. Respective 5% ad val. As specified by
industry approved headings the Engineering
by Indigenization Sub-components and 10% ad val. Development
Committee of components. Board or Central
Engineering Board of
Development Board Modules and assemblies. 15% ad val. Revenue.
having members
from the Ministry of
Industries and
Production and
Central Board of
Revenue.
=============================================================================================================================

2 This notification shall come into force on 6th June, 2006.
FORM-I [See clause(i)]
(To be filled in by the importer or any person or persons duly authorised by him form his organisation)



=========================================================================================================
Name & address of the Importer
NTN/FTN
=========================================================================================================
Port of clearance Clearing Agents
Name/No
=========================================================================================================
S.No H.S. Code Description Specifications Applicable Quantity Unit value Unit of Total value
of imported rate of duty measure in Pak
inputs Rupees
=========================================================================================================
(1) (2) (3) (4) (5) (6) (7) (8) (9)
=========================================================================================================

CERTIFICATE It is certified that the description and quantity mentioned above are commensurate with the inputs requirement and that the same are not manufactured locally. It is further certified that the above items shall not be used for any other purpose.
Signature _______________________
Name ____________________________
N.I.C. No ______________________
FORM-II
(See clause iv)
(To be filled in by the Collector of Sales Tax Collectorate)



=======================================================================================================================
Header information
=======================================================================================================================
NTN/FTN of importer Name of importer Approval No
=======================================================================================================================
(1) (2) (3)
=======================================================================================================================
Details of input goods (to be filled by the Goods import
authorised officer of the Regulatory Authority) (Collectorate of
imported
=======================================================================================================================
HS code Description Specs Applicable Quantity UOM Quantity Collectorate CRN/ Mach. Date of
Customs imported No CRN/ Mach.
Duty rate No
=======================================================================================================================
(4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
=======================================================================================================================

It is certified that the description and quantity mentioned above are commensurate with the input requirement, and that the same are not manufactured locally.
Signature -------------------------------------------------
Name -------------------------------------------------
Stamp -------------------------------------------------
Note: In case of clearance through Pakistan Customs Computerised System (PACCS), the above information shall be furnished on line against a specific user I.D. and password obtained under section 155D of the Customs Act, 1969.
(SHAHID AHMAD)
Additional Secretary
Copyright Business Recorder, 2006

Comments

Comments are closed.