Thatta Cement Company Limited was incorporated in 1980 as a Public Limited Company. In 1982, the manufacturing facility was contracted in collaboration with the OECF Aid of Japan. The plant was based on Dry Process Technology with four stage suspensions pre-heater. Mitsubish Corporation supplied the complete functioning plant.It is efficiently controlled, monitored and evaluated by competent professionals and experts. Subsequent to privatization, the plant was upgraded by adopting modern technologydesigned by M/s L.V Technology andFLSmidth, Denmark. The plant after up-gradation has a cement capacity of 2,000 tons per day.
Thatta Cement Company has three packing lines capable of delivering cement at 240 tons/hour cumulatively. The cement can be dispatched in 50 kilogram paper or poly propylene woven bags, 1.5 tons bulk bags and cement in bulkers of 50 and 70 tons capacities.
The company's products include:
-- Ordinary Portland Cement (OPC)
-- Sulphate Resisting Cement (SRC)
-- Portland Blast Furnace Slag Cement (PBFSC)
-- Granulated Ground Blast Furnace Slag (GGBF)
-- Oilwell Cement Class G
Thatta Cement has a well defined Quality Management System for production of cement and has proved its mark. The whole process starting from the selection of basic raw material through engineering process till the finished product is carried out under stringent and uncompromising quality control and supervision. Our products have secured ISOcertification and proudly meet Pakistan standards specification and British Standards due to its unmatchable and finest quality. Thatta Cement is proud to have earned the title of one of the leading cement producing brands of Pakistan by meeting the international standards. Thatta Cement manufactures cement according to the Pakistan / British standards.
The company's top priority is to produce consistentquality product and to achieve the target, rigorous plans and strategies have been orchestrated. Consistent cement quality is also obtained through rigorous control of the temperature upon clinker grinding. Assessment of cement quality is carried out by our laboratory, equipped with suitable and calibrated test equipment to meet all chemical, physical and performance requirements of the relevant standards.
The manufacturing technology adopted by Thatta Cement is a mixture of conventional and new concepts adopted from time to time. The factory now employs state of the art Process Automation Cemat 7 system supplied by Siemens, Germany for efficient process control.
Thatta Cements enjoys the cardinal and gleaming position amongst its competitor. Thatta Cement is a strong and cost-effective solution for builders. It is used at construction sites all over Pakistan for concrete requiring good strength, better setting time, sulphate resistant properties, low heat of hydration and low alkali content together make it number one choice of the builders and Thatta Cement stands out as one of the leading brands of building material both for above and below ground constructions.
============================================================================
Cement Brand OPC SRC Slag Cement
============================================================================
Pakistan Standard PS-232/2008 PS-612/1989 PS 1631/1984
British Standard BS EN 197-1:2011 BS EN 197-1:2011 BS EN 197-1:2011
============================================================================
Comments
Comments are closed.